vet du målene på lagerhuset?
Tja... Tolker jeg det gamle innlegget jeg har riktig skal innvendig dybde for lagrene være 19.5mm. Jeg har aksler og rør fra 1970 1200, og husker jeg bøyde de originale når jeg satte på andre rør. Så 19.5mm skal vel stemme.
"Not sure of the actual part number, but I can tell you that the Bearing Covers with a 22.5 mm seating depth are intended for the axle tube for Beetles with the 1358 mm rear track width, and the Bearing Cover with a 19.5 mm seating depth matches the tubes for the later 1967 on 1350 mm rear track width, this is the same part as used on Type 3 from August 1965. Not sure if that helps ,but you just seem to have had mismatched parts in this area, if you've now got it to seal, and the drums go on allright, it should be OK"
Svar fra vzi-forums...