FIBREGLASS SALE!! Christmas discounts!! 10% off orders placed before monday!!

Christmas Sale!!! 10% listed price if ordered BEFORE monday Blunker

These are NOT your normal thin/crappy/poor fitting panels that have been avaliable in the past - these are PROPER FITTING Heavy duty panels that fit FIRST TIME! They were ALL moulded from ORIGINAL VOLKSWAGEN PANELS and even have mounting plates so you can bolt them straight on!!!!

If you are interested then I will need a 20% deposit (and the balance on delivery/colection)
I can take paypal BUT I would prefer CASH or BANK TRANSFER

So here is what I have........

- A standard mini-split (11window) ready to paint = 4200kr
- A "panel-van" model (no windows) ready to paint = 4800kr
- Metalflake colours etc can be ordered for an extra 800kr
- COLLECTED IN FREDRIKSTAD - I can deliver for an extra 200kr

- I can supply "Mini-Manx" in Metalflake, Plain colours & paintable finish.....
- Metalflake= 2600kr
- Plain Colour = 2500kr
- Paintable Finish = 2000kr

Beetle Long bonnet (pre67)
The mould for these was taken from an original 1967 bonnet to make the fit almost perfect . Available as a single skin for racing or with a fibreglass stock style hinge panel , which features threaded brass inserts to bolt onto the original hinges . There is also a return lip around the edge to ensure a good seal onto the stock bonnet gasket .
The quality of these bonnets is second to none , you'll never need to use a poorly fitting repro panel , or do rust repair again .
- Single skin/race weight = 2000kr
- standard/with mounting panel = 2500kr

Beetle long bonnet - Pre 67' 'Gasser' Bonnet
This is a re-moulded version of the Classic 70's Gasser bonnet . To make this mould we bonded the scoops into an original bonnet to ensure an excellent fit . Very light weight and strong , these are available as a single skin race item , or with a bonded in fibreglass hinge panel
- Single skin/race weight = 2200kr
- standard/with mounting panel = 2700kr

Beetle 67-on Flared wings/fenders ( upright headlight )
These moulds were taken from some original 70's flared wings , which have been extensively re shaped to ensure an excellent fit . Perfect for that 70's look race car .
- standard = 1500kr (per pair)

Beetle Rear Fared wings/fenders (all years)
These flared rears are an excellent fit . They have about a 2 inch flare with a downward lip so you can trim them to how you want .
- Standard = 1500kr (per pair)

Beetle Pre 67' Flared 'Gasser' wings/fenders
Pre 67 'sloping headlamp' versions of the earlier gasser wings , these have been moulded from original wings with a flare added for that unmistakable 70's style . Also available with a headlight bucket/bowl for street cars .
- standard = 1500kr (per pair)
- with headlamp bowls (street) = 1750 (per pair)

Stock style Rear Wings/Fenders
Stock fibreglass rear wings , moulded from originals . Very light weight and strong , better and cheaper than repro steel items .
- Standard = 1500kr (per pair)

Stock style Pre 67' Front wings/fenders
These sloping headlamp front wings are great replacements for your rotten or rusty items . Moulded from original panels to ensure an excellent fit , lots better than more expensive repro steel ones . Available as lightweight for drag racing , or with a headlight bowl for street cars .
- standard = 1500kr (per pair)
- with headlight bowls = 1750kr (per pair)

40cm Oversize Rear Wings
Rear wings which have been made 40cm wider to accommodate larger rear tyres . These have been made to look like as much like a stock wing as possible by retaining the original shape .
- Standard = 2600kr (per pair)

Dummy Upright Headlights (for drag racing/offroad use)
These dummy headlights have been designed to go with our wings as a lightweight replacement for the headlights on your drag car .
- Plain gel coat colour = 400kr (per pair)
- Sliver METALFLAKE = 600kr (per pair)

Dummy Sloping Headlights (for drag racing/offroad use)
These dummy headlights have been designed to go with our wings as a lightweight replacement for the headlights on your drag car .
- Plain gel coat colour = 400kr (per pair)
- Sliver METALFLAKE = 600kr (per pair)

Pre 67 Engine/Deck Lid ( Semi W )
Fibreglass replacement Semi 'W' deck lid
available as a single skin item for drag racing or with a hinge panel for street cars .
These will fit late model cars as well as per 67 .
- Single skin/lightweight = 1000kr
- standard INC hinge panel = 1500kr

EMPI Style 'Eyebrow' Engine/Deck Lid
Replica of the original EMPI Eyebrow vented deck lid . Available as a single skin or with a hinge panel . Much better fit than some repro eyebrow lids available .
- Single skin/lightweight = 900kr
- standard INC hinge panel = 1500kr

"lowback" Buggy seats - ideal for racecars/hotrods/dune buggies
These are the standard "Dune Buggy" seats that I had fitted in my meyers manx..... Extremley light weight and easily fitted to standard VW seat runners
- SEATS = 1200kr (per pair)
- With covers = 2250kr (per pair)
- With METALFLAKE covers = 2600kr (per pair

Battery Boxes - Ideal for Race Cars
These are designed for use in dune buggy/kit cars where the standard battery position has changed....
complete with top... PERFECT for all you Racers out there - finished in BLACK gel coat,
- Standard = 400kr