VWNorge

Right.....

The new year is almost here and I am now taking orders for the next "Run" which will be around the time of Volksworld Show So the expected delivery time is approx 12/14 weeks,

I am offering a 10% off ALL orders made before the 7th January
(20% deposit needed!)

I will also be making a delivery run to TRONDHEIM and then across to ALESUND and BERGEN so now is the time to make an order if you want delivery!!!!

I am also now offering 1303 & 1302 FENDERS, Both front & rear (standard width!)
- Standard weight/with headlight bowls/PERFECT FITMENT!!!!
- 5000kr Set of 4 fenders (x2 fronts & x2 rears!)

- A standard mini-split (11window) ready to paint = 4500kr
- A "panel-van" model (no windows) ready to paint = 5200kr
- Metalflake colours etc can be ordered for an extra 800kr
- COLLECTED IN FREDRIKSTAD - I can deliver for an extra 300kr

- I can supply "Mini-Manx" in Metalflake, Plain colours & paintable finish.....
- Metalflake= 2800kr
- Plain Colour = 2600kr
- Paintable Finish = 2200kr

Beetle Long bonnet (pre67)
The mould for these was taken from an original 1967 bonnet to make the fit almost perfect . Available as a single skin for racing or with a fibreglass stock style hinge panel , which features threaded brass inserts to bolt onto the original hinges .  There is also a return lip around the edge to ensure a good seal onto the stock bonnet gasket .
The quality of these bonnets is second to none , you'll never need to use a poorly fitting repro panel , or do rust repair again .
- Single skin/race weight = 2500kr
- standard/with mounting panel = 3000kr

Beetle long bonnet - Pre 67' 'Gasser' Bonnet
This is a re-moulded version of the Classic 70's Gasser bonnet . To make this mould we bonded the scoops into an original bonnet to ensure an excellent fit . Very light weight and strong , these are available as a single skin race item , or with a bonded in fibreglass hinge panel
- Single skin/race weight = 2600kr
- standard/with mounting panel = 3000kr

Beetle 67-on Flared wings/fenders ( upright headlight )
These moulds were taken from some original 70's flared wings , which have been extensively re shaped to ensure an excellent fit . Perfect for that 70's look race car .
- standard = 1800kr (per pair)

Beetle Rear Fared wings/fenders (all years)
These flared rears are an excellent fit . They have about a 2 inch flare with a downward lip so you can trim them to how you want .
- Standard = 1800kr (per pair)

Beetle Pre 67' Flared 'Gasser' wings/fenders
Pre 67 'sloping headlamp' versions of the earlier gasser wings , these have been moulded from original wings with a flare added for that unmistakable 70's style . Also available with a headlight bucket/bowl for street cars .
- standard = 1800kr (per pair)
- with headlamp bowls (street) = 2200 (per pair)

Stock style Rear Wings/Fenders
Stock fibreglass rear wings , moulded from originals . Very light weight and strong , better and cheaper than repro steel items .
- Standard = 1800kr (per pair)
- light weight = 1500kr (per pair)

Stock style Pre 67' Front wings/fenders
These sloping headlamp front wings are great replacements for your rotten or rusty items . Moulded from original panels to ensure an excellent fit , lots better than more expensive repro steel ones . Available as lightweight for drag racing , or with a headlight bowl for street cars .
- standard = 1800kr (per pair)
- with headlight bowls = 2000kr (per pair)

40cm Oversize Rear Wings
Rear wings which have been made 40cm wider to accommodate larger rear tyres . These have been made to look like as much like a stock wing as possible by retaining the original shape .
- Standard = 3000kr (per pair)

Dummy Upright Headlights (for drag racing/offroad use)
These dummy headlights have been designed to go with our wings as a lightweight replacement for the headlights on your drag car .
- Plain gel coat colour = 400kr (per pair)
- Sliver METALFLAKE = 600kr (per pair)

Dummy Sloping Headlights (for drag racing/offroad use)
These dummy headlights have been designed to go with our wings as a lightweight replacement for the headlights on your drag car .
- Plain gel coat colour = 400kr (per pair)
- Sliver METALFLAKE = 600kr (per pair)

Pre 67 Engine/Deck Lid ( Semi W )
Fibreglass replacement Semi 'W' deck lid
available as a single skin item for drag racing or with a hinge panel for street cars .
These will fit late model cars as well as per 67 .
- Single skin/lightweight = 1000kr
- standard INC hinge panel = 1500kr

EMPI Style 'Eyebrow' Engine/Deck Lid
Replica of the original EMPI Eyebrow vented deck lid . Available as a single skin or with a hinge panel . Much better fit than some repro eyebrow lids available .
- Single skin/lightweight = 900kr
- standard INC hinge panel = 1500kr

"lowback" Buggy seats - ideal for racecars/hotrods/dune buggies
These are the standard "Dune Buggy" seats that I had fitted in my meyers manx..... Extremley light weight and easily fitted to standard VW seat runners
- SEATS = 1200kr (per pair)
- With covers = 2250kr (per pair)
- With METALFLAKE covers = 2600kr (per pair)


Battery Boxes - Ideal for Race Cars
These are designed for use in dune buggy/kit cars where the standard battery position has changed....
complete with top... PERFECT for all you Racers out there - finished in BLACK gel coat,
- Standard = 400kr

 :)

So anyone want to order anything  ??? :)

So any orders?? I will be visiting my supplier over the weekend  :)

Only one day left for the new year discount (10%)

I will have 1302 & 1303 FENDERS/Wings in approx 12weeks.....

I will also offer "Deals" on large orders ie: x4 fender & a hood OR fenders/hood/decklid etc etc

Just drop me an PM with your needs  :)

So does anyone want any 1303 & 1302 fenders - Taking orders NOW  :)

Still open to orders  :)

Still taking orders..... I also have 1303 & 1302 fenders  :)

I will also offer "Bulk" deals (ie: x4 fenders & hood/decklid)

Just drop me a PM if you have ANY questions  :)

I am planning another UK "Run" in approx 6 weeks.......

So please let me know if you need ANY parts.....

I have a few New items "In-Stock" now......

- Stock "Late model" (68up) DECKLID'S with Hinge/mounting panel = 1500kr
- OVAL REAR LIGHT HOUSING (Left & Right) = 600kr PAIR
- 1303 & 1302 FENDERS = 4000kr PER SET OF 4
- EMPI Style "Scoops" (These are different to the others and fit a little better!) = 600kr PAIR
- BAJA KITS (These actually fit!) = 4000kr
- Mini-Split screen van's = 6000kr DELIVERED!

But let me know if you have a "Special Order" and maybe we can work out a deal  ;) :)

So any orders ???  :)

I also have "Tacho-Pods" to mount your Tachometer out on the Bonnet/hood in PERFECT line of sight  Blunker

They will take up to a 90mm tach (approx) which is the "Standard" size of aftermarket tachometers....

Ideal if you are fitting one of my Fibreglass bonnets/hoods as you can "Mount" them easy before painting....

I will try and find a picture if anyone is interested in one of these   :)

I have these "IN-STOCK" and ready to ship......

So any orders???  :)

Any more orders  ???  :)

 :)

bump  :)

Still open to offers on everything else......

A little bump for a friday  ;) :)