Vis innlegg
|
Sider: [1] 2 3 ... 27
|
3
|
Forum / Snikk-snakk / Sv: Noen som vet hvordan en skal få tak i den monkiboy fyren?
|
på: juli 15, 2015, 20:34:56 pm
|
Everyone has been contacted.... Import duties paid..... If only people know the hassle and money I have spent trying to get everyones parts to them.... I do not live in norway anymore, I will be back for scc etc..... I do not produce these parts (I never said I did!) and as such I rely on "Others" who have caused me MANY MANY problems! Everyone WILL get their parts. (full stop.) Contact details: Tel: (0044) 07469995890 Email: monki772003@yahoo.co.uk OR lee_cooksey@yahoo.co.uk Or just check in on Facebook
|
|
|
4
|
Forum / Snikk-snakk / Sv: Noen som vet hvordan en skal få tak i den monkiboy fyren?
|
på: juni 20, 2015, 09:50:26 am
|
I am just going to confirm a few details here......
1: All parts have been received (shipped at my own expence!!!! approx 3000kr!!!
2: The customer was/is happy with the quality of the products.
3: Now I am expected/being asked to pay ALL the import duties/taxes for the customer as well!!??
4: I have agreed to make these payments just to keep everyone happy......
I think I have been more than fair in this case and I hope this is an end of it!
|
|
|
5
|
Forum / Hva skjer? / Sv: HØRT om SCC 2015...
|
på: juni 18, 2015, 21:00:58 pm
|
Looks like I will be making a few deliveries at SCC..... I am hoping to see some of these mini splits & mini manx!
|
|
|
10
|
Bruktbørsen / Deler ønskes kjøpt / Sv: WANTED: x1 1967 "1500" 6volt Beetle Starter Motor.....
|
på: desember 16, 2014, 01:24:50 am
|
They kinda do different things..
The automatic starter lets you convert your car to 12 V without changing the bushing. As you say it is supported in its own body. Never really saw the big thing with this as you would have to have the engine out to change the flywheel and grind the '65 trans to accept the 12V flywheel anyway. Changing the bush is the small part of the job..
The "67 1500" starter does something totally different.. It gives you the opportunity to put a newer/souped up engine into your old car that while remaining 6V can use the 12V flywheel and bigger clutch..
Hmmmm Interesting........ I was planning on running the 6volt starter on 12v anyhow To be honest I am just looking for the Simplest way of doing it  You are right about the Bush.... Thats the easy bit! Any tips on "Clearancing??
|
|
|
11
|
Bruktbørsen / Deler ønskes kjøpt / Sv: WANTED: x1 1967 "1500" 6volt Beetle Starter Motor.....
|
på: desember 16, 2014, 00:43:42 am
|
Don't have any here at the moment but I have a good tip  The starter you are looking for is basically one that looks and works like a 68-> 12V starter but is in fact 6V. Now if you have an ordinary 6V starter and an ordinary 12V starter, take them all apart on the kitchen table and put the right parts together you will end up with exactly what you are looking for. That's what VW did  hehehehe Nice plan dude..... I have been talking to a few others who say I can use a 12v "Semi-Auto" starter  As its "Self surporting" and I won't need to change the "Bush" Any thoughts on this?? 
|
|
|
13
|
Forum / Hva skjer? / Sv: HØRT om SCC 2015...
|
på: desember 08, 2014, 01:37:29 am
|
The prices I stated were for trailering a race car........
If your just cruzin up in your own bug or bus then I am sure you could do it for less than 10,000nok
|
|
|
14
|
Forum / Hva skjer? / Sv: HØRT om SCC 2015...
|
på: desember 08, 2014, 01:29:55 am
|
Yeah I sure you could do it a little cheaper but when you consider EVERYTHING....... Fuel, Ferries, Coffee, Food, Bridges/tolls, Hotels, tickets, Beer, etc etc etc It all starts to add up........ This is the route I take: https://www.google.co.uk/maps/dir/Calais,+France/Deventer,+The+Netherlands/Osnabr%C3%BCck,+Germany/Puttgarden,+Germany/Rodby,+Denmark/Gothenburg,+Sweden/Oslo,+Norway/@55.0682351,-1.9706072,5z/data=
|
|
|
15
|
Forum / Hva skjer? / Sv: HØRT om SCC 2015...
|
på: desember 07, 2014, 13:33:05 pm
|
I just want to get as many "Outsiders" to come as I can...... I am sure I will get at least a few UK vw's to drive up, its still around 10,000nok for the "Round trip"  So what does the SCC team think of the "Free-Long-Distance-Tickets" 
|
|
|
16
|
Forum / Hva skjer? / Sv: HØRT om SCC 2015...
|
på: desember 07, 2014, 11:30:34 am
|
Hey it was just an idea...... Maybe it should be over 1000kms, Each way, Take a picture of your speedo before you leave and then the Officials can check when you arrive at Gerdermoen.... LIke I say, Just an idea
|
|
|
17
|
Forum / Hva skjer? / Sv: HØRT om SCC 2015...
|
på: desember 07, 2014, 03:09:05 am
|
There won't be much room in my bus as I'll be bringing LOADS of "Stock" to sell to pay for the trip Its also gonna be an expensive year...... Bad Camberg, European Bug In, Bug-Run, SCC plus all the other UK stuff Better start saving (Anyone who knows me will realise what a joke that is!) I did have one idea for the SCC team.... Maybe offer FREE weekend tickets to "Long Distance" Show go-ers.... Just an idea, Maybe To anyone over 1000kms 
|
|
|
18
|
Forum / Hva skjer? / Sv: HØRT om SCC 2015...
|
på: desember 07, 2014, 01:55:39 am
|
Na not hopeless....... I will get a few people up 2015 don't worry, Just not so sure about the racers :/ Oh well more spaces for Norwegian racers then 
|
|
|
21
|
Bruktbørsen / Deler ønskes kjøpt / WANTED: x2 1965 REAR DRUMS, NoS Prefered ;)
|
på: desember 07, 2014, 01:35:31 am
|
As Always boys & girls...... As the title says....... I am looking for x2 1965 Beetle REAR drums, the better the condition the more I will pay If anyone has a NoS pair that would be great, Drop me a reply and let me know what you have..... Pictures would really help 
|
|
|
23
|
Forum / Hva skjer? / Sv: HØRT om SCC 2015...
|
på: desember 07, 2014, 00:37:05 am
|
I am trying to get a few more European's "UP" for SCC 2015...... But it all comes down to COST Me and a norwegian friend worked it out "Roughly" and if you want to bring a Race Car from the UK and get home again its approx 18-20,000 MINIMUM!!
|
|
|
24
|
Forum / Snikk-snakk / Sv: Lee Richard Cooksey....
|
på: november 09, 2014, 12:12:09 pm
|
Jeg vet ikke hva det er som ligger bak men noe MÅ det være siden ikke admin fjerner denne tråden. At Lee har et problem med levering av disse delene angår INGEN andre enn Lee og de som har handlet av ham. Tråder som var langt mildere hva angår personangrep ble moderert bort som som snø på varm asfalt for noen få år siden...... Jeg er fristet til å tro at også admin's har en høne å plukke med Lee og at det er derfor tråden får bli stående umoderert og åpen...
 Thanks again to an understanding member This is the problem with "Forums" The REAL story gets lost......... As I keep saying....... If ANYONE wants to contact me then please do so on PM, Email, or telephone, All contact details are listed....
|
|
|
26
|
Forum / Snikk-snakk / Sv: Lee Richard Cooksey....
|
på: november 08, 2014, 13:20:14 pm
|
I would also like to say THANKYOU to all the members who have "stand up for me"  I know I have made some mistakes but I am not a "Bad Guy" really........ As I have mentioned several times, ALL DELIVERIES WILL BE MADE! 
|
|
|
27
|
Forum / Snikk-snakk / Sv: Lee Richard Cooksey....
|
på: november 08, 2014, 12:42:18 pm
|
Not really sure what to say...... Thankyou for the compliments on the parts, I knew everyone would be happy when they finally got them...... I do understand that things have got a little confused, delayed, etc but I am TRYING to keep everyone happy I have updated ALL buyers/customers with delivery dates and I have even offered to PAY import costs/taxes out of my own pocket, I am NOT making any money on alot of these items!!! Here is all my contact details if anyone has any further questions: Tel: +4740067168 Tel/uk: +442089505692 Email: monki772003@yahoo.co.uk OR lee_cooksey@yahoo.co.uk
|
|
|
28
|
Forum / Snikk-snakk / Sv: Lee Richard Cooksey....
|
på: november 06, 2014, 04:25:32 am
|
yes I am aware of my poor actions and I am trying to fix them.... ALL deliveries will be made. Please remember some of these product were being produced for the first time and as such needed a little help.... others buyers/friends/members may have only paid deposits due to extreme delivery mileage/issue/import etc. Other "issues" may also step into play..... - Weather/moulding process, which leads to me having further delays - Accidental damage for which I am personally responsible until deliver (ie costs!) - Tax/import/boarder crossings As we have seen above most buyers/friends/members are happy with these HIGH QUALITY products and I hope this goes to prove that I do come through...... In the End  I really hope my Silly English writings "Translate" in to real meaning, I am a good really 
|
|
|
29
|
Forum / Snikk-snakk / Sv: Lee Richard Cooksey....
|
på: november 06, 2014, 00:51:59 am
|
Coolio bro.... Just didn't like a "Thread" named after me...... Its all cool When you`re in sales all PR is good PR you know   There is no question that parts will be delivered...... I may be an idiot but I am not an Arsehole  Feel free to PM or Call or email with any questions, problems, request Tel:+4740067168 Email: monki772003@yahoo.co.uk
|
|
|
|